Front differential drop to correct front CV angles after the installation of a leveling kit or lift kit. Works with all 2-4" front lift kits. Many of these trucks will have a slight vibration when lifted over 3" in the front. This kit will eliminate the vibration that might be coming from the front CV shafts.
Posted by Josh B on 12th Mar 2021
4 Bolts, 4 Washers, 4 Spacers. Not much to it. Only thing I did not like was receiving a shipping notification with tracking 3 days before it actually shipped. The parts shipped USPS Priority which is 2 day delivery, but took 6 days to arrive due to not being actually shipped for a couple days after I ordered. Ordered on Tuesday, received the following Monday.
Posted by AARON B. on 13th Aug 2020
2018 Chevrolet 3500. I have the FabTech 3-1/2" leveling kit with steering Knuckles and UCA's turned down to about 2". I wanted these to get the angles back closer to stock. Worked like a champ and very easy to install. I loosened all 4 bolts down to where the nuts were still holding the stock bolts and then did one bolt and spacer at a time. Took about 45 minutes or so. I did end up putting bigger washers on the new bolt heads. The ones sent were very small compared to stock. No big deal though. I would recommend them for sure.
Posted by Cody on 2nd Oct 2019
Best $40 I’ve ever spent. Well, besides that one time in Mexico. This was super easy to install. No cutting, no grinding and smoothed out the ride by correcting the CV angles. This made a real difference and is a must have. It is amazing how much better my truck rides and feels. Thanks CCM!
Posted by Josh J. on 27th Aug 2019
Kit components are good quality. Installation took about an hour with the proper tools. Only wish the included washers were a larger diameter similar to the stock hardware.
Installed On: 2019 Silverado 3500HD w/ Fabtech 3.5 Inch Leveling Kit
Posted by Chad on 12th Jun 2019
I purchased this kit to help get my CVs as flat as possible on my 2013 LML. I am pleased to say that the kit was super easy to install and great quality. Took less than an hour with the proper tools. My CVs are at a much better operating angle now, nearly flat with my current configuration. I can't tell if its in my head or not, but I do believe the truck drives better now. Likely due to better angles which minimized vibrations. Thanks CCM!
Posted by jwfabweld on 24th Apr 2018
I just put this kit on last night and this morning I noticed more harmony in the front end as I drove to work. My cv angles are better and the diff dropped 5/8’’. This kit is robust and solid. There isn’t any other way to say it. I am very happy with the results. If you are on the fence about this...don’t be. Do this mod.
2012 CCSB 2500 4wd Sierra
Posted by Unknown on 15th Sep 2017
This was easy to install just a couple jack stands and a floor jack to hold the diff in place , quality is good and it does help on cv angles .
Posted by Sam on 6th Jun 2017
Easy install - great product for such small issue.
Had to completely remove all bolts from the Diff carrier to install the larger spacer but worked great none the less, still looking for the vibration issue but I can say that it is not from the Diff carrier being too high now... thank you for such a good product.
Posted by Tommy on 10th Apr 2017
http://www.gmfullsize.com/index.php?threads/308295/
I have a right up here on the parta
Posted by matt on 31st Mar 2017
I ended up milling down the spacers from 1" to 3/4 of a inch. I never tried to fit them at 1" just eyeballed it and look to be a little bit of a fit mit issue on the pass side rear cross member. Also I only had my stock keys turned up to where I still had a 1 1/4" low in the front rake. After installing the 3/4" spacers the cv angles are perfect just like stock. Fairly easy install with a 3/8s drive ratchet with a flex head.